MD Deck
The display shows a code made up of three or five letters and a message. � This system has the Self-Diagnostic function (see �Self-diagnosis Display� on page 94). The disc will not be inserted. � Insert the MD in the direction of the arrow. The controls do not work. � The MD is dirty or scratched. Replace the MD with a new one. The MD will not play. � Moisture condensation has built up. Remove the MD and leave the system turned on for several hours until the moisture evaporates. � Nothing is recorded on the MD. Recording is not possible. � The MD is protected against erasure. (�C11� and �Protected� appear alternately.) Slide the tab to close the slot (see page 37). � Connect the sound source properly. � A pre-recorded MD is in the deck. Replace the disc with a recordable MD. � Replace the disc with a recordable MD that has sufficient time remaining or erase unnecessary tracks. � The power cord (mains lead) was unplugged or a power interruption occurred during recording. Start recording over from the beginning. �-Over-� is displayed. � You have reached the end of the MD. Press m to return to the beginning of the MD. �OVER� lights up during recording. � A strong signal was input during recording. When the sound is distorted, reduce the recording level (�Adjusting the recording level� on page 46), then re-record. �Repeat All� will not be selected. � This sometimes occurs when the play mode of the CD is set to �All Shuf�. Change the play mode of CD.
Speakers
Sound comes from one channel or unbalanced left and right volume. � Check the speaker connection and speaker placement. Sound lacks bass. � Check that the speaker�s + and � jacks are connected correctly.
CD Player
The CD tray does not close. � The CD is not placed properly. The CD will not play. � The CD is not lying flat in the disc tray. � The CD is dirty. � The CD is inserted label side down. � Moisture condensation has built up. Remove the CD and leave the system turned on for about an hour until the moisture evaporates. Play does not start from the first track. � The player is in program or shuffle mode. Select �1 Disc� or �All Discs� in the �Play Mode� menu (pages 27, 29). �Over� is displayed. � You have reached the end of the CD. Press and hold m to return.