No hay comentarios de productos.
5
6
7
8
- How to remove the Clamp Arm Assy
1. Make the system in the carriage mechanism mode, and set the mechanism to the eject mode. 2. Remove the three Springs. 3. While pressing the position A, turn the Clamp Arm Assy upward, slide it to the left, and remove. Caution: When assembling, place the boss of the Detection Pin in the cam unit of the Loading Rack.
A
Spring
B
Clamp Arm Assy Spring Detection Pin Spring A
place the boss in the cam
Detection Pin
C
- How to remove the Spindle Motor Assy
1. Make the system in the carriage mechanism mode, and have it clamped. 2. Remove the CD Core Unit and remove the leads from the Inner Holder. 3. Set the mechanism to the eject mode and remove the Clamp Arm Assy. 4. Set the mechanism to the clamped and move the Pickup to circumference. 5. Remove the two Screws, and remove the Spindle Motor Assy.
Screw
D
Spindle Motor Assy
E
F
CX-3164
5 6
7
8
27
|