PIONEER DEHP8450
Manual de Usuario

Section

MP3/WMA Player

05

Playing a MP3/WMA

3 After a CD-ROM has been inserted, press SOURCE to select the built-in CD player. Press SOURCE until you see Compact Disc displayed. 4 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 5 Press 5 or � to select a folder. � You can not select a folder that does not have an MP3/WMA file recorded in it. � Press � for 2 seconds or longer to return to folder 01 (ROOT). However, if folder 01 (ROOT) contains no files, playback commences with folder 02. 6 To perform fast forward or reverse, press and hold 2 or 3. � This is fast forward and reverse operation only for the file being played. This operation is canceled when the previous or next file is reached. 7 To skip back or forward to another track, press 2 or 3. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. Notes � When a MP3 disc with the ID3 tag is played, is displayed. � When playing discs with MP3 and/or WMA files and audio data (CD-DA) such as CDEXTRA and MIXED-MODE CD, both types can be played only by switching mode between MP3/WMA and CD-DA with BAND. � If you have switched between playback of MP3/WMA files and audio data (CD-DA), playback starts at the first track on the disc. � The built-in CD player can play back an MP3 or WMA file recorded on CD-ROM. (Please refer to pages 51 and 52 that can be played back.)
En

12

3

4

These are the basic steps necessary to play a MP3/WMA with your built-in CD player. More advanced MP3/WMA operation is explained starting on page 25. 1 MP3 (WMA) indicator Shows when the MP3 (WMA) file is playing. 2 FOLDER NUMBER indicator Shows the folder number currently playing. 3 PLAY TIME indicator Shows the elapsed playing time of the current track. 4 TRACK NUMBER indicator Shows the track (file) currently playing. 1 Press EJECT. CD loading slot appears. 2 Insert a CD-ROM into the CD loading slot. Playback will automatically start. CD loading slot

English Español Deutsch Français Italiano Nederlands

EJECT button

� You can eject a CD-ROM by pressing EJECT. � If the front panel is in the EJECT position (shown above), buttons other than EJECT, VOLUME, OPEN, and ATT (on the remote control) do not operate.

23