7.1.2 DISASSEMBLY
- Removing the Case Unit (not shown) Remove the Case Unit.
CD Mechanism Module
- Removing the CD Mechanism Module (Fig.1) Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module (not shown). - Removing the Grille Assy (Fig.1) Remove the two screws. Disconnect the two stoppers and then remove the Grille Assy (not shown).
Grille Assy
Fig.1
- Removing the Tuner Amp Unit (Fig.2) Remove the three screws.
Remove the two screws.
Remove the screw.
Unbend the tabs at four locations indicated by arrow until straight. Remove the Tuner Amp Unit.
