Inicio >>
PIONEER >>
DEH-P330/XN/UC Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
DEH-P330,P3300,P33
7.1.2 DISASSEMBLY
- Removing the Case (not shown) 1. Remove the Case.
CD Mechanism Module
- Removing the CD Mechanism Module (Fig.1) Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module. - Removing the Grille Panel Assy (Fig.1) Remove the two screws and then remove the Grille Panel Assy.
Grille Panel Assy
Fig.1
- Removing the Tuner Amp Unit (Fig.2) Remove the two screws. Straight the tabs at three locations indicated. Remove the screw. Remove the three screws and then remove the Tuner Amp Unit.
*) Tuner Amp Unit is different partially from this photo.
