PIONEER DEHP2650
Manual de Usuario

Section

05

Built-in CD Player

Playing a CD

4 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 5 To perform fast forward or reverse, press and hold c or d. 6 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track.
Notes ! The built-in CD player plays one, standard, 12cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot. ! If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again. ! If the built-in CD player does not operate properly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page 29. ! The built-in CD player is not equipped with CD TEXT function. ! A CD TEXT disc is a CD featuring recorded text information such as disc title, artist name and track title.

These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on the next page. 1 Play time indicator Shows the elapsed playing time of the current track. 2 Track number indicator Shows the track currently playing. 1 Press OPEN to open the front panel. CD loading slot appears.

# After a CD has been inserted, press SOURCE to select the built-in CD player.

2 Insert a CD into the CD loading slot. Playback will automatically start.
CD loading slot

EJECT button

# You can eject a CD by pressing EJECT. # To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open.

3

Close the front panel.

12

En