|
No hay comentarios de productos.
Section
04
Tuner
Listening to the radio
4 To perform manual tuning, briefly press c or d. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
1
2
34
These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page.
Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 28).
# You can cancel seek tuning by briefly pressing c or d. # If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button.
1 Band indicator Shows which band the radio is tuned to, AM or FM. 2 Frequency indicator Shows the frequency to which the tuner is tuned. 3 Stereo (5) indicator Shows when the selected frequency is being broadcast in stereo. 4 Preset number indicator Shows which preset has been selected. 1 Press SOURCE to select the tuner. Press SOURCE until you see TUNER displayed. 2 Use VOLUME to adjust the sound level. Rotate it to increase or decrease the volume. 3 Press BAND to select a band. Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed.
10
En
|
