PIONEER DEH-2910MP/XS/UR
Manual de Usuario

Section

Operating this unit
! When you recall a preset station, the tuner may update the preset station with a new frequency from the station�s AF list. (This is only available when using presets on the F1 or F2 bands.) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station. ! Sound may be temporarily interrupted by another program during an AF frequency search. ! AF can be turned on or off independently for each FM band. ! The preset number may disappear from the display if the tuner tunes in a regional station which differs from the originally set station. ! The regional function can be turned on or off independently for each FM band.

02

Receiving traffic announcements
TA (traffic announcement standby) lets you receive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a station that broadcasts traffic information) or an enhanced other network�s TP station (a station carrying information which cross-references TP stations). 1 Tune in a TP or enhanced other network�s TP station. TP indicator will light. 2 Press TA to turn traffic announcement standby on.
# To turn traffic announcements standby off, press TA again.

Using PI Seek
If the tuner can�t find a suitable station, or reception status becomes bad, the unit will automatically search for a different station with a same programming. During the search, PI SEEK is displayed and the output is muted.

Using Auto PI Seek for preset stations
When preset stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall. ! The default setting for Auto PI Seek is off. See Switching Auto PI Seek on page 14.

Limiting stations to regional programming
When AF is used, the regional function limits the selection of stations broadcasting regional programs. 1 Press FUNCTION to select REG.

3 Use VOLUME to adjust the TA volume when a traffic announcement begins. The newly set volume is stored in memory and recalled for subsequent traffic announcements. 4 Press TA while a traffic announcement is being received to cancel the announcement. The tuner returns to the original source but remains in the standby mode until TA is pressed again.
# You can also cancel the announcement by pressing SOURCE, BAND, a, b, c or d while a traffic announcement is being received. Notes ! You can also turn the TA function on or off in the menu that appears with the pressing of FUNCTION.

English

2 Press a or b to turn the regional function on or off.
Notes ! Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

En

9