PIONEER DEH-1610/XU/EE
Manual de Usuario

Section

Audio Adjustments

06

Adjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. Press AUDIO until LOUD appears in the display. 2 Press a to turn loudness on. LOUD indicator is displayed.

3 Press c or d to select a desired frequency. Each press of c or d selects frequency in the following order: 100160250 (Hz)
Notes ! After turning the F.I.E. function on, use the balance adjustment (refer to page 11) and adjust front and rear speaker volume levels until they are balanced. ! Turn the F.I.E. function off when using a 2speaker system.

# To turn loudness off, press b.

3 Press c or d to select a desired level. Each press of c or d selects level in the following order: LOW (low)MID (mid)HI (high)
Note You can also turn loudness on or off by pressing LOUDNESS.

Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Press AUDIO to select SLA. Press AUDIO until SLA appears in the display. 3 Press a or b to adjust the source volume. Each press of a or b increases or decreases the source volume. SLA +4  SLA 4 is displayed as the source volume is increased or decreased.
Note The MW/LW tuner volume level can also be adjusted with source level adjustments.

Front image enhancer (F.I.E.)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to low-range frequencies. You can select the frequency you want to cut.
Precaution When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.

English

1 Press AUDIO to select FIE. Press AUDIO until FIE appears in the display.
# To turn F.I.E. off, press b.

2

Press a to turn F.I.E. on.

En

13