About this manual
This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this products potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe precautions on this page and in other sections.
Protecting your unit from theft
The front panel can be detached from the head unit and stored in the protective case provided to discourage theft.
Important ! Never use force or grip the display and the buttons tightly when removing or attaching. ! Avoid subjecting the front panel to excessive shocks.
! Keep the front panel out of direct sunlight and high temperatures.
Removing the front panel
Precautions
CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
1 Press DETACH to release the front panel. Press DETACH and the right side of the panel is released from the head unit. 2 Grab the front panel and remove. Grab the right side of the front panel and pull away to the left. The front panel will be detached from the head unit.
English
! Keep this manual handy as a reference for operating procedures and precautions. ! Always keep the volume low enough so you can hear sounds outside of the car. ! Protect this product from moisture. ! If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. ! If this unit does not operate properly, contact your dealer or nearest authorized Pioneer Service Station.
3 Put the front panel into the protective case provided for safe keeping.
Attaching the front panel
1 Place the front panel flat against the head unit. 2 Press the front panel into the face of the head unit until it is firmly seated.