|
|
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
2-3. CABINET (R) ASSEMBLY
* Notes when attaching the cabinet (R) assembly 1 Function switch block
KY-39 board
(CF4580) (From CN7803 of KY-39 board)
1 FP-656 flexible board (From CN7806 of KY-39 board)
Align S7823 position with that of START/STOP switch.
KY-3 Boa 9 rd 2 Screw (M1.7�3.5)
1 FP-657 flexible board (From CN7804 of KY-39 board)
Cabinet (R) assembly
1 FP-649 flexible board (From CN7802 of KY-39 board) 4 Speaker (SP901)
2 Screw (M1.7 � 3.5) 2 Screw (M1.7 � 3.5) 11 Harness From CN7801 of
KY-39 board
3 SP retainer assembly
The numbers in square ` show the sequence in the case when the speaker (SP901) onlyis removed.
2-4. EVF ASSEMBLY
6 VF ornamental panel
Claw
7 FP-655 flexible board
5 Hinged flexible sheet To assemble it, engage 6 While the EVF slide base 7 Remove by depressing with the claw. the claw depressing it
down once. 2 Screw (M2 � 3)
5 Insert pincers and disengage the claw in the direction of the arrow 33 Remove it by sliding.
4
8 FP-657 flexible board
(From CN7804 of KY-39 board)
4 Slide the EVF. a
8 Push the both claws at the same time with 9 Move the VF-121 pincers, and remove it. 22 Screw 11 FP-656 flexible board board in the direction (From CN7806 of KY-39 (M1.7 � 3.5) of the arrow a. board)
The numbers in square ` show the sequence in the case when the FP-657 flexible board only is removed.
!� VF121 board !¢ FP656 flexible board
VF board holder
!� b c !£ Disengage the claw. !§ Disengage the catch.
0 Push the claw in the direction of the arrow b, and !¡ Move the VF flexible clamper in the direction of the arrow c.
!¶ VF flexible clamper
2-2
|
|
|
> |
|
