Recording still images on a tape � Tape Photo recording
Notes �During tape photo recording, you cannot change the mode or setting. �When recording a still image, do not shake your camcorder. If you do so, the image may flutter. �You cannot use PHOTO during the following operations: ( The indicator flashes on the screen.) � Fader � Digital effect �When you record images with the flash, sound may not be recorded clearly. If you record a moving subject with the tape photo recording When you play back the still image on other equipment, the image may flutter. This is not a malfunction. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button. To use the tape photo recording during the tape recording You cannot check an image on the screen by pressing PHOTO lightly. Press PHOTO deeper. The still image is then recorded for about seven seconds, and your camcorder returns to the standby. To record clear still images with little unsteadiness We recommend that you record on a �Memory Stick� using the Memory Photo recording. When you record images with the flash The allowed shooting distance is shorter than when you record on a �Memory Stick� in Memory Photo recording. When playing back images recorded with the flash on other equipment These images may flicker.