4 Remove the ST cover in the direction of the arrow. 3 Claw
176 DD
1 From the flash unit (33P)
283 CV
5 Tapping screw (M1.7 � 5)
2 Dowel
2-15.FLASH UNIT (FLASH SECTION) (3)
4 Flash unit
Caution
2 From the flash unit (45P)
3 Two dowels
1 Open the cassette lid
D
7 D-1
6
Caution
The Flash unit (45P) 2 is routed through the gap between the cabinet L section and the mechanism deck assembly. If the Flash unit is removed forcibly, the other flexible boards may be damaged because the Flash unit is removed from the gap. Be careful not to damage the flexible board.