|
|
|
Usuarios conectados
Actualmente hay 6043 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
DCR-TRV345E/TRV350/TRV351/TRV355E/TRV356E
2-3. MSW Code � The lower parts of the data of C page, addresses F6, FA and FE represent the MSW codes (mode switch mechanism position) when errors occurs. � The upper parts of the data of C page, addresses F6, FA and FE represent, when the mechanism position is to be moved, the MSW codes at the start movement (when moving the loading motor). � The lower parts of the data of C page, addresses F7, FB and FF represent the MSW codes of the desired movement when the mechanism position is to be moved. � Unloading
Mechanism position MSB MODE SW C MODE SW B MODE SW A EJECT BL USE
Releasing lock of cassette campartment
0 0 0 1 = 1
0 1 1 1 = 7
0 1 = 7
BL LOAD BL STOP BL TURN BL REC/PB BL
Loading � REW
0 1 = 7 1 0 = 6
0 1 = 7
LS chassis movement range Pinch roller is detached
0 0 1 1 = 3 0 0 1 0 = 2 0 1 1 1 = 7
0 1 0 1 = 5
0 1 0 0 = 4
Pinch roller is pressed
Mechanism Position EJECT BL USE LOAD STOP TURN REC/PB REW
MSW Code 1 7 3 2 6 4 0 5
Contents Position at which the cassette compartment lock is released. The mechanism will not move any further in the unloading direction. BLANC code. Between two codes. The mechanism will not be stopped by this code while it is operating. EJECT completion position. When the cassette is ejected, the mechanism will stop at this position. Code during loading/unloading. Code that is used while the LS chassis is moving. Normal stop position. The pinch roller separates, the tension regulator returns, and the brakes of both reels turn on. Position at which is used when the pendulum gear swings from S to T or from T to S. PB, REC, CUE, REV, PAUSE, FF positions. The pinch roller is pressed and tension regulator is on. REW position. REW are carried at this position. The mechanism will not move any further in the loading direction.
0 0 0 0 = 0
0 1 1 1 = 7
6-64
|
|
|
> |
|
