The following screen appears when the file name is not already in use.
The SCSI ID of the changer detected is displayed as the default value.
For example, as the ID of the changer is set to �6� and the ID of the drive is set to �3�, these values will be displayed. Enter �6� for the ID of the media changer to be checked using this program, and press the ENTER key. 7. The following screen appears. Enter the serial number of the unit and press the ENTER key.
Enter the serial number of the unit.
8. The number of the slot set with a disc will be displayed. The screen asks whether the inspection is started. Enter �Y� and press the ENTER key.
Displays the slot number (s) holding a disc. (If all slots are empty, � will be displayed.)
