SONY DCRDVD7
Manual de Usuario

� AUTO
The white balance is adjusted automatically.

OUTDOOR (
� Touch the point where you want to �x and

)

adjust the exposure on the screen. appears. � Touch [END].

The white balance is set to the brightness of the outdoor environment or daylight under �uorescent lamps.

INDOOR (�)
The white balance is set to the brightness of warm white �uorescent lamps.

To return the setting to automatic exposure, touch [AUTO]�[END].
� If you set [SPOT METER], [EXPOSURE] is

ONE PUSH (

)

automatically set to [MANUAL]. � The setting returns to [AUTO] when you have the power source disconnected from your camcorder for more than 5 minutes.

The white balance will be adjusted according to the ambient light. � Touch [ONE PUSH].
� Frame a white object such as a piece of

EXPOSURE
You can �x the brightness of a picture manually. When recording indoors on a clear day, for instance, you can avoid backlight shadows on people next to the window by �xing the exposure to that of the wall side of the room.

paper, to �ll the screen under the same lighting conditions as you will shoot the subject. � Touch [ ]. �ashes quickly. When the white balance has been adjusted and stored in the memory, the indicator stops �ashing.
� Do not shake your camcorder while

Using the Setup items

is �ashing quickly. � �ashes slowly if white balance could not be set. � If keeps �ashing even after you have touched , set [WHITE BAL.] to [AUTO].
� Touch [MANUAL]. � Adjust the exposure by touching

/
� Touch

. . appears.

To return the setting to automatic exposure, touch [AUTO]� .
� The setting returns to [AUTO] when you have

the power source disconnected from your camcorder for more than 5 minutes.

WHITE BAL. (White balance)
You can adjust the color balance to the brightness of the recording environment.

� When you have changed the battery pack while [AUTO] is selected, or you bring your camcorder outdoors from inside the house while using �xed exposure, select [AUTO] and aim your camcorder at a nearby white object for about 10 seconds for better color balance adjustment. � Redo the [ONE PUSH] procedure if you change the [PROGRAM AE] settings, or bring your camcorder outdoors from inside the house, or vice versa during the [ONE PUSH] is set to on. � Set [WHITE BAL.] to [AUTO] or [ONE PUSH] under white or cool white �uorescent lamps. � The setting returns to [AUTO] when you have the power source disconnected from your camcorder for more than 5 minutes.

57