JBL DCR600II
Manual de Servicio

DCR600II
e Status Button: This button operates only when the DVD600II has been selected. When a disc is playing, pressing this button will display the Status Banner, which contains information about the disc and enables you to change the functions. fg M1 and M2 Macro Buttons/OpenClose Button: Press these buttons to store or recall a �Macro� which is a preprogrammed , sequence of commands stored in the remote. When the DVD600II has been selected, the M1 Button f functions to open or close the disc tray drawer. (M2 g has no function.) If the drawer is opened while a disc is still playing, playback will continue and discs not in use may be changed. If the drawer is opened while the unit is stopped, the disc that was playing will be presented at the front-center position of the tray. h Main Input Selector: Pressing this button will perform two actions: 1) If the DCR600II is not turned on, it will power up. 2) It will switch to the page for the DCR600II, which will cause the remote to operate only the receiver and the transport functions of the DVD600II. i CD Input Selector: Pressing this button will perform three actions: 1) If the DCR600II is not turned on, it will power up. 2) It will select CD as the input source. 3) It will switch to the page for the CD player whose codes have been programmed into the remote, which will cause the remote to operate only the CD player. Press the Main Button h to return the remote to control of the DCR600II receiver. j Tape Input Selector: Pressing this button will perform three actions: 1) If the DCR600II is not turned on, it will power up. 2) It will select TAPE as the input source. 3) It will switch to the page for the tape deck whose codes have been programmed into the remote, which will cause the remote to operate only the tape deck. Press the Main Button h to return the remote to control of the DCR600II receiver. k AM/FM Tuner: Selects the receiver�s tuner as the listening choice. Pressing this button when the tuner is already in use will select between the AM and FM bands. l Video 1 Input Selector (VCR 1): Pressing this button will perform three actions: 1) If the DCR600II is not turned on, it will power up. 2) It will select VIDEO 1 as the input source. 3) It will switch to the page for the video device whose codes have been programmed into the remote, which will cause the remote to operate only that video device. You may find it convenient to connect your VCR to the Video 1 input, since it is the only video source that also features outputs for recording. Press the Main Button h to return the remote to control of the DCR600II receiver. m Video 2 Input Selector (Cable or Satellite): Pressing this button will perform three actions: 1) If the DCR600II is not turned on, it will power up. 2) It will select Video 2 as the input source. 3) It will switch to the page for the video device whose codes have been programmed into the remote, which will cause the remote to operate only that device. You may find it convenient to connect your cable television box or satellite receiver to this input. Press the Main Button h to return the remote to control of the DCR600II receiver. n Video 3 Input Selector (VCR 2): Pressing this button will perform three actions: 1) If the DCR600II is not turned on, it will power up. 2) It will select VIDEO 3 (the front panel input) as the input source. 3) It will switch to the page for the video device whose codes have been programmed into the remote, which will cause the remote to operate only that video device. Since this input is located on the front panel of the receiver, you may find it convenient to temporarily connect a camcorder, video game, or a second video cassette player to the Video 3 input. Press the Main Button h to return the remote to control of the DCR600II receiver. o TV Input Selector: Pressing this button will perform three actions: 1) If the DCR600II is not turned on, it will power up. 2) It will select TV as the input source. 3) It will switch to the page for the television whose codes have been programmed into the remote, which will cause the remote to operate only that device. You may find it convenient to connect your television to this input, particularly since it does not have a video input associated with it, the assumption being that the program signal originates at the TV, and that the TV is already displaying the video portion of the signal. Press the Main Button h to return the remote to control of the DCR600II receiver. p Sleep: Places the DCR600II in the Sleep Timer mode. After the time shown in the display has elapsed, the DCR600II will automatically go into Standby. Each press of this button changes the time until turn-off in intervals of 10 minutes, starting with a maximum of 90 minutes. This button is also used to change channels on your TV when the TV is selected. This button is also used during the �Auto Search� procedure when programming the remote. q Test: Begins the sequence used to calibrate the speaker output levels. When the CD input has been selected and a CD recorder is in use, this button is used to select among the analog and digital inputs to the CDR. r 6CH (TV/VID): Press to select the 6-Channel Direct Input � as the input source. When used with a compatibly programmed VCR, DVD, TV or Satellite receiver that has a �TV/Video� function, pressing this button will switch between the output of that device and the external video input to that device. Consult the owner�s manual for your specific player or satellite receiver for the details of how it implements this function. s Volume Up: Use to raise the system volume. t Surround Mode/Audio: Begins the process of changing the surround mode when the DCR600II is selected. After the button has been pressed, use the � / ¤ Buttons y to select the desired surround mode. When the DVD600II is selected, this button allows you to select from the available audio tracks (including audio surround modes) or languages on a DVD disc that is currently playing. Press this button repeatedly until the desired audio selection appears. This button is also used to tune channels when the TV is selected. This button is also used during the �Auto Search� procedure when programming the remote. u All Off: This feature of the JBL One-Click� (patent pending) remote simultaneously sends Power Off commands to all programmed devices controlled by the remote. v All On: This feature of the JBL One-Click remote simultaneously sends Power On commands to all programmed devices controlled by the remote. w Volume Down: Use to lower the system volume. x Channel/Title/Guide: Starts the process of setting the receiver�s speaker output levels using an input source rather than the test tone. Press this button, then use the � / ¤ Buttons

11