Installation
5. Install the front panel if necessary 6. Install the grease filter
^ Remove the protective film from the grease filter frame. ^ To reinsert the grease filter, pull the deflector out. The installation kit DML 300 is necessary. It can be obtained as an optional accessory from Miele. The installation kit has an installation manual supplied.
^ Make sure that the red plastic guides are at the front and facing up. ^ Insert the grease filter into the deflector, and push upwards. It should glide onto the fixing pins. ^ The deflector can be adjusted up to 2" (50 mm) towards the front with the two adjusting screws left and right in the deflector. Adjust the deflector until it is flush with the front of the adjacent cabinetry.