flashes in the display. Set the current time, and you can use the unit as a clock. The unit displays the time regardless of the position of FUNCTION (applicable when the AC cord is connected). ~ ~ Set POWER P�ress HOUR to ON. and MINUTE starts to adjust the clock.
Radio or CD play can be turned off automatically designated time. ~ ~ Set POWER to ON. to select
45+30
at a
Press SLEEP repeatedly the power is turned off.
~90+75+60+
the time
+15->
until
OFF(off)7
The clock display
flashing.
The PM indicator
Both of the dots flash.
~
Set POWER
to TIMER. until the power is turned off
H the unit is left for 30 seconds, the setting is canceled. ~
10 check the time remaining Press SLEEP once.
PressCLOCK to complete
the setting.
The clock starts from 00 seconds.
The remaining time is displayed for 5 seconds. To shorten the time, press the button repeatedly. To cancel the sleep timer Press SLEEP repeatedly until OFF is displayed. POWER also cancels the sleep timer.
If the clock display flashes
This is caused by a power interruption. The current time needs to be reset and the batteries need to be replaced to back up the clock.
Switching
NOTE The timer does not function on battery power supply.
