No. Adjustment Adjustment Test Point Adjustment Method / Item / Point 3 Test Mode Remote Setting The following adjustment items (4) to (14) Controller Menu should be adjusted in test mode.
1. Depress the TEST button of remote-controller over 2 sec. to set in test mode. 2. Select a desired adjustment item by up or down button, and depress ENTER button to decide, at shown in below. / (During the setting menu screen, the unit is changed to VTR1 mode.) 3. In test mode, 2 items of VIDEO test mode and AUDIO test mode. 4. Apply the video signal into VTR1 IN terminal. 5. In case of remote-controller built in FUNCTION button, depress the button to switch adjustment item in order.
Remarks
4 CHROMA VCO
Remote Screen Controller
Adjust the remote controller so that the color Color Bar Signal bar is displayed correctly. / (Set center of 3 Generator / Chroma colored points for adjustment point.) Signal : ON / Level : 75% Color Bar Sinal Generator / Chroma Signal : OFF Level : 100% the trigger at Ntes:
1. Waveform should adjusted in center
5 BRIGHT
Remote TP906 (G) / Adjust the remote-controller so that Controller TP904 BP(Black Level Positive) is 0.75V. (VCOM) / TP908 (VGND)