|
|
|
Usuarios conectados
Actualmente hay 5728 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
To record part of the CD always starts from the first track. To start in the middle of a track, play the CD first and press 1I SET for CD at the point you wish to start recording from. Then, press ..-rhe pause mode for CD button is released automatically and recc)rding starts.
When
q
is pressed,
recording
Sound adjustment during recording
The output volume and tone of the speakers or headphones are freely varied without affecting the recording.
mm
q q
Dc) not press the buttons on Deck 2 during recording. q cannot be depressed if the erasure prevention tab on the side of the tape to be recorded is broken off.
II Preparation
q
To erase a recording A previous recording is erased when a new recording is made on that part of that tape. 1 Insert the tape you want to erase into Deck 1.
Use Type I (normal)
tapes only.
o Set the tape to the point where recording will start. * Note that recording is done on only one side of the tape.
2 F)ress TAPE and stop all the tape operation in Deck 2. 3 Windup the tape to the point where the erasure is to be started. 4 F�ress q on Deck 1 to start the erasure.
7 Insert the tape to be recorded on into Deck 1. Insertthetape with theside tobe recorded on first facing out
from the unit.
1)
WA
...............e
!I!!
2 Press one of the function buttons and prepare the source to be recorded. ~ record from a CD, press CD and load the disc(s).
~record from a tage, press TAPE. Then, insert the original tape into Deck 2 and play it. To record from a radio broadcast, press TUNER/BAND and tune into a station. To record from a connected source, press PHONO or VIDEO/AUX and play.
About cassette tapes
q
To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.
3 Press q cm Deck 1 to start recording.
> is depressed simultaneously. When the selected function is CD, playback and recording start simultaneously. Side A
q
q
To record on the tape again, cover the tab openings with adhesive tape, etc. �120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended. Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.
To stop recording, press s/A on Deck 1. To pause recording, press II on Deck 1. �To resume recording, press it again. To record selected tracks of the CD
Before pressing
q , program
the tracks (page 14).
ENGLISH ~ ~
|
|
|
> |
|
