PREPARATION
Placement
Place the speakers in their proper position. All speakers for a full 5.1-channel home theater come supplied with your DVD system.
To attach the front speaker to the pedestal Placing the main unit Allow 15 cm (6 in.) clearance from the top of the unit for movement of the disc compartment lid. Attaching the anti-skid patches To prevent the surround and center speakers from slipping, attach the supplied anti-skid patches to the bottom of the speakers. Use 3 patches for each of these speakers.
En
To mount the surround speakers on the wall Mount each speaker on a spot that can hold its weight.
L&R: Front speakers (marked "FRONT") C: Center speaker (marked "CENTER") Place it in the center of the two front speakers, possibly on or below the TV set. LS&RS: Surround speakers (marked "REAR") Place them directly to the side of or slightly behind the listening area. Align them horizontally, preferably about 1 meter (3 feet) above ear height. SW: Subwoofer Place it on the floor close to a wall or in a corner of the room.
AIWA disclaims any responsibility for injury to persons or other accidents caused by not fitting the surround speakers properly or if the place of the installation is not suitable. �Either of the two front speakers can be used as the right or the left one; likewise for the surround speakers. �Do not place the left and right front speakers close to the TV set, as doing so may cause picture noise. �Sound output from the center and the surround speakers is only available when the Dolby or the DTS surround system is activated with the appropriate setting.
