|
|
|
Usuarios conectados
Actualmente hay 5948 visitantes y
1 usuarios online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
PERFORMANCE CHECK (VIDEO AND AUDIO) NO. CHECK POINT PROCEDURE AND CONDITIONS NOTE, ctc.
11 COLOUR SYSTEM 1 Receive the E-12CH PAL colour bar signal. Select colour system does not work.
CX80J5
NO. CHECK POINT PROCEDURE AND CONDITIONS NOTE, ctc. a colour system other than PAL. Make sure the
CONTRAST 1 Receive the E-5CH signal. 2 Receive the E-10CH SECAM colour bar signal.
2 Select CONTRAST in the Menu. Select a colour system other than SECAM. Make 3 Using UP/DOWN keys, make sure the contrast sure the colour system does not work. Select a colour system other than N4.43. Make sure the colour system does not work.
changes accordingly. 3 Receive the E-37CH NTSC4.43 colour bar signal.
2 COLOUR 1 Receive the J-13CH signal. 4 Receive the JA-8CH NTSC3.58 colour bar signal.
2 Select COLOUR in the Menu. Select a colour system other than N3.58. Make sure 3 Using UP/DOWN keys, make sure the colour the colour system does not work.
changes accordingly. (At the MIN position, there must be no colour.)
3 BRIGHTNESS 1 Receive the E-5CH signal. 12 SOUND SYSTEM 1 Receive the OI-9CH PAL (D/K) colour bar signal.
2 Select BRIGHT in the Menu. Select the M, B/G and I sound systems to make 3 Using UP/DOWN keys, make sure the black level sure the sound system does not work. Select the M, B/G and D/K sound systems to make sure the sound system does not work.
changes accordingly. 2 Receive the E-23CH (I) monoscope pattern signal.
4 TINT 1 Receive the J-13CH signal. 3 Receive the E-12CH (B/G) colour bar signal. Se-
2 Select TINT in the Menu. lect the M, I and D/K sound systems to make 3 Using UP key, make sure the tint changes tosure the sound system does not work. the sound system does not work.
ward green. With the DOWN key, make sure it 4 Receive the JA-8CH (M) colour bar signal. Select changes toward red. the B/G, I and D/K sound systems to make sure
5 NORMAL 1 In the Picture and Sound adjustment mode, press SPATIALIZER OFF SPATIALIZER 1 SPATIALIZER 2 ness changes accordingly.
Normal key to make sure the displayed content 13 SPATIALIZER 1 Receive the E-5CH music broadcast signal. alone appears normal. 2 Using Menu screen, make sure the sound
12
12-1 12-2
6 SHARPNESS 1 Receive the E-5CH signal. 3 In mono mode, listen to sound from the
modes change as follows.
2 Select SHARPNESS in the Menu. speakers and make sure it feel wide. 3 Using UP/DOWN keys, make sure the sharp-
7 CHANNEL SIGN 1 Make sure all the channel (0 thru 99) signs appear
DISPLAY COLOUR green (with the AFT on).
8 TREBLE 1 Receive the E-5CH signal.
2 Select TREBLE in the Menu of sound adjustment. 3 Using UP/DOWN keys, make sure the treble
changes accordingly.
9 BASS 1 Receive the E-5CH signal.
2 Select BASS in the Menu of sound adjustment. 3 Using UP/DOWN keys, make sure the bass
changes accordingly.
10 BALANCE 1 Receive the E-5CH signal.
2 Select BALANCE in the Menu of sound adjustment. 3 Using UP/DOWN keys, make sure the left-to-
right balance changes accordingly.
|
|
|
> |
|
