SHARP CX80J5
Manual de Servicio

PERFORMANCE CHECK (VIDEO AND AUDIO) NO. CHECK POINT PROCEDURE AND CONDITIONS NOTE, ctc.
11 COLOUR SYSTEM 1 Receive the E-12CH PAL colour bar signal. Select colour system does not work.

CX80J5

NO. CHECK POINT PROCEDURE AND CONDITIONS NOTE, ctc. a colour system other than PAL. Make sure the

CONTRAST 1 Receive the E-5CH signal. 2 Receive the E-10CH SECAM colour bar signal.

2 Select CONTRAST in the Menu. Select a colour system other than SECAM. Make 3 Using UP/DOWN keys, make sure the contrast sure the colour system does not work. Select a colour system other than N4.43. Make sure the colour system does not work.

changes accordingly. 3 Receive the E-37CH NTSC4.43 colour bar signal.

2 COLOUR 1 Receive the J-13CH signal. 4 Receive the JA-8CH NTSC3.58 colour bar signal.

2 Select COLOUR in the Menu. Select a colour system other than N3.58. Make sure 3 Using UP/DOWN keys, make sure the colour the colour system does not work.

changes accordingly. (At the MIN position, there must be no colour.)

3 BRIGHTNESS 1 Receive the E-5CH signal. 12 SOUND SYSTEM 1 Receive the OI-9CH PAL (D/K) colour bar signal.

2 Select BRIGHT in the Menu. Select the M, B/G and I sound systems to make 3 Using UP/DOWN keys, make sure the black level sure the sound system does not work. Select the M, B/G and D/K sound systems to make sure the sound system does not work.

changes accordingly. 2 Receive the E-23CH (I) monoscope pattern signal.

4 TINT 1 Receive the J-13CH signal. 3 Receive the E-12CH (B/G) colour bar signal. Se-

2 Select TINT in the Menu. lect the M, I and D/K sound systems to make 3 Using UP key, make sure the tint changes tosure the sound system does not work. the sound system does not work.

ward green. With the DOWN key, make sure it 4 Receive the JA-8CH (M) colour bar signal. Select changes toward red. the B/G, I and D/K sound systems to make sure

5 NORMAL 1 In the Picture and Sound adjustment mode, press SPATIALIZER OFF SPATIALIZER 1 SPATIALIZER 2 ness changes accordingly.

Normal key to make sure the displayed content 13 SPATIALIZER 1 Receive the E-5CH music broadcast signal. alone appears normal. 2 Using Menu screen, make sure the sound

12
12-1 12-2

6 SHARPNESS 1 Receive the E-5CH signal. 3 In mono mode, listen to sound from the

modes change as follows.

2 Select SHARPNESS in the Menu. speakers and make sure it feel wide. 3 Using UP/DOWN keys, make sure the sharp-

7 CHANNEL SIGN 1 Make sure all the channel (0 thru 99) signs appear

DISPLAY COLOUR green (with the AFT on).

8 TREBLE 1 Receive the E-5CH signal.

2 Select TREBLE in the Menu of sound adjustment. 3 Using UP/DOWN keys, make sure the treble

changes accordingly.

9 BASS 1 Receive the E-5CH signal.

2 Select BASS in the Menu of sound adjustment. 3 Using UP/DOWN keys, make sure the bass

changes accordingly.

10 BALANCE 1 Receive the E-5CH signal.

2 Select BALANCE in the Menu of sound adjustment. 3 Using UP/DOWN keys, make sure the left-to-

right balance changes accordingly.