|
Usuarios conectados
Actualmente hay 5688 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Basic operation
Key settings of the ROTARY section
Reverb
The [REVERB OFFSET] knob adjusts the depth of reverb. When the knob is in the center position, the reverb depth will be as specified by the settings of the program. The reverb depth can be adjusted by the Normal Edit mode and EX Edit mode Group 5 �Reverb Mix Level� parameters.
[ON] key
This key switches the rotary speaker on/off. If this is off, pressing the [FAST] key or [STOP] key will have no effect. ON (LED lit): The rotary speaker will be on.
5. Listening to the demo songs
Here�s how to listen to the demo songs built into the CX3. The CX-3 contains 9 demo songs. 1. Press the [GLOBAL] key to enter Global mode. The key LED will light. 2. Press the PROGRAM [8]. 3. Press the [WRITE/ENTER] key. 4. Press the [WRITE/ENTER] key once again. The demo will begin playing. When the first song ends, the next song will begin. 5. To stop demo playback, press the [EXIT] key. After pressing the [WRITE/ENTER] key in step 3, you can press the [� ] or [®] key to change the song that will be played first.
[STOP] key
This key starts or stops the rotation of the rotary speaker�s rotor and horn. Stop (LED lit): The rotation will gradually slow down and stop.
[FAST] key
This key switches the rotational speed of the rotary speaker (fast and slow). Fast (LED lit): The rotation will speed up. If the [STOP] key was used to stop the rotation, pressing the [FAST] key will defeat the setting of the [STOP] key, and rotation will begin. (The [STOP] key LED will go dark.) The fast and slow rotational speeds, the time over which rotation changes from fast to slow, the time over which rotation changes from slow to fast, the speed and time for the rotor and horn of the rotary speaker, and the time until rotation stops after it is switched off etc. can all be adjusted by the Normal Edit mode and EX Edit mode Group 6 parameters (p.19).
Other effects
In addition to the effects described above, you can use the knobs and keys of the front panel to modify the sound in various ways.
Overdrive
The [EXPRESSION/OVERDRIVE] knob adjusts the depth of overdrive. This will also affect the volume. The [EXPRESSION/OVERDRIVE] knob adjusts the output level of the tone generator, changing the input level to the internal amp simulation. The effect can be adjusted by controlling Overdrive in conjunction with the �Amp Gain� parameter (p.19) of the amp simulator.
13
|
|
|
> |
|