No hay comentarios de productos.
Digital Recorder
DVI/Computer
Component Video L R Optical Coax
FIGURE 4 � SOURCE COMPONENT CONNECTIONS
Dashed lines (� � � �) indicate a choice of either coaxial or optical digital audio connections for each device. Dotted lines (����) indicate a choice of component, composite or S-video connections for each device, or DVI (HDCP) (cable not included) or analog VGA (cable included) for the DVI/Computer source only. Component video is the preferred connection, but in order to see the on-screen menus, you must also make the S-video connection. When the on-screen menus are activated while the DVI/Computer source input is in use, the picture will be of the last source used before DVI/Computer if that source had an S-video connection to the CVR700. If the last source did not have an S-video connection, the picture will be temporarily deactivated. The picture-in-picture (PIP) video connection (indicated by a black dotted line) must be composite, and is in addition to any video connection to the main source input jacks. Step 5. This step is only required if you have external source devices, including a device used for watching television, such as an HDTV tuner, a cable television box, a satellite receiver or a personal video recorder (PVR). Connect your source devices to the CVR700 as shown in Figure 4. All jacks are permanently assigned to the input sources for which they are named. Therefore, although you may connect any audio or video device to any source, always make all connections from a single device to jacks named for the same source. JBL recommends connecting certain device types to certain sources in order to benefit from the preprogramming of the two remote controls: INPUT SOURCE DEVICE TYPES AUX (TV, HDTV Tuner, VCR/Combo, DVD, CD, Cable, Sat) VCR (VCR/Combo) CBL/SAT (Cable, Sat, HDTV Tuner) GAME/CAM (Game, Camcorder) DR (DVD-R, CD-R, DVHS, TiVo®, PVR) DVI/COMP (DVI/DVD, DVI/Cable, DVI/Sat, HD Tuner) AUDIO connections: Right channel (red) on source to right (red) on CVR700, and left channel (white) on source to left (white) on CVR700. DIGITAL AUDIO connections (if available): Choose either coaxial (orange) to coaxial (orange) OR optical to optical for each device. VIDEO connections: Choose component (Y/Pb/Pr � green/blue/red), composite (yellow) or S-video (4-pin) for each video source. When using component video inputs, the S-video connection for that source is also required in order to view on-screen menus. When the on-screen menus are activated while the DVI/Computer source input is in use, the picture will be temporarily deactivated. Only the digital video interface (DVI) connection or an analog VGA connection using the supplied cable is available for the DVI/Computer source. When using PIP, composite (yellow) must be used for PIP jack. When source is DVI/Comp, PIP is only available as an inset, not split screen. PIP is not available at all when source is HD component video (480p and better). When you are not using the CVPD50 screen, or if you desire a second display, connect the component, composite and S-video Monitor outputs (if used by your sources) to your video-display monitor or TV. Switch the display�s input to match the type of video used for the current source. Basic Configuration Step 7. See Step 6 on back cover of this guide for final connection sequence. Step 8. Select digital audio and video inputs for external sources: For external sources using the analog audio and composite video inputs with 4:3 aspect ratio (e.g., VCR), you may skip this step. Press the source selector, then the System selector, then the OSD button to view the main audio menu. Scroll to Sources and press the Set button to view the Sources menu. Scroll to the Audio Input line and use the arrow keys to select the source�s coaxial or optical digital audio input. Scroll to the Video Input line and use the arrow keys to select the source�s S-video or component video input. Scroll to the Source A.R. line to indicate 16:9 aspect ratio, which should be used whenever available. You may not assign one source�s audio or video input to another source (except you may assign a video source to the tuner).
In/Rec
L
R
Optical
Coax
Video
S-Video
Y Pb
Analog VGA Output
DVI Video Output
Out/Play
Pr
Game/Camcorder
Optical Coax S-Video Component Video Video Audio
CVR700 Front Panel
GAME/CAM
L
R
Optical
S-Video In/Rec
L
R
VIDEO
S-VIDEO
L
R
Video
S-Video
Component Video
Y
Handheld Personal Recorder (MD, MP3, etc.)
OPTICAL DIGITAL AUDIO INPUT (S/P-DIF)
Out/Play Video Coax Optical Coax
Pb Pr
Cable Box, Satellite Receiver or Other A/V Device
VCR
HDTV Tuner or Cable Box or Satellite Receiver
The default surround audio mode is Logic 7, with Dolby® Digital and DTS® digital signals detected automatically. See the owner�s manual for more surround mode options. Step 9. Configure speakers: If you are using the JBL Cinema Vision loudspeakers, you only need to specify a 5.1- or 7.1-channel system. Press the OSD button on the remote to view the main audio menu, then use the arrow keys to scroll down to the System Configuration line and press the Set button to select it and configure 5.1 or 7.1. For a 7.1 system operation, you must also select the Speakers line in the main menu and scroll to the Configuration submenu to set the back surround speakers. If you are using other speakers, you will also need to configure their frequency-response capabilities using the other menus. See the owner�s manual for details. Step 10. Set the output levels with EzSet: Set the Volume to �2dB. Sit in the listening position and hold the CVR700R2 remote in front of you at shoulder level, pointing it at the CVPD50 screen power-on LED or at the CVR700 front-panel display (if a CVPD50 is not being used). Press the SPL button on the remote, and then the Set button when it lights red. Following the instructions in the remote�s LCD display, scroll until the display shows the number of speakers in your system and press the Set button to select it. Hold the remote steady until the word COMPLETE flashes in the LCD display. (You may repeat using a different volume setting.) Step 11. Configure fan speed: Press the OSD button on the remote to view the main audio menu. Scroll to the Advanced line and press the Set button. Scroll to the fan line and use the left/right arrow keys to choose the correct setting. If the CVR700 has been installed in an enclosed space, such as inside a cabinet, select Maximum Cooling to prevent shutdown due to overheating. If ventilation is plentiful, select Minimum Noise to slow the fan speed for quieter operation. Step 12. Your system is configured: Sit back and enjoy!
®
PRO CINEMA COMES HOME�
SOURCE COMPONENT CONNECTIONS
