JVC CU-VH1EXS
Manual de Usuario

40 EN

USING THE REMOTE CONTROL UNIT (cont.)
NOTES: � When editing onto a tape that was recorded at 12-bit, the old and new soundtracks are recorded separately. � If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas. � If feedback or howling occurs during TV playback, move the microphone away from the TV, or turn down the TV�s volume. � If you change from 12-bit to 16-bit in midrecording and then use the tape for Audio Dubbing, it is not effective from the point where 16-bit recording began. � During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded in 16-bit audio or a blank portion, Audio Dubbing stops. � To perform Audio Dubbing while watching on the television, make connections. ( pg. 18) � To perform Audio Dubbing with a video unit connected to the player�s S, AUDIO(L/R), VIDEO connector, first set �S/AV INPUT� to �ON� in VIDEO Menu. ( pg. 26, 27) The �AUX� indication appears instead of �MIC�. However, you cannot hear the sound from the connected device through the headphones.

Audio Dubbing (DV mode only)
The audio track of a tape recorded in DV format can be customised only when recorded in the 12-bit and SP modes. ( pg. 27)
Microphone

Speaker

Audio cable (provided)

Open the cover.

1 2 3 4

Play back the tape to locate the point where editing will start, then press PAUSE (9). While holding A. DUB (D) on the remote control, press PAUSE (9). The �9D� and �MIC� indicators appear. Press PLAY (U), then begin �narrating�. Speak into the microphone. � To pause dubbing, press PAUSE (9). To end Audio Dubbing, press PAUSE (9), then STOP (8).

To hear the dubbed sound during playback� Set �DV NARR.� to �ON� or �MIX�. ( pg. 26, 27)