You can turn the unit on by pressing any button except a, =, + and ~ on the front panel.
1
2
Press BAND to turn the radio on.
The radio frequency appears. Press BAND again to select the band from among F1 (FM1 ), F2 (FM2), F3 (FM3), Al (AM1) and A2 (AM2). The band indications
q
1
With the unit on, press and hold SELfor more than 2 seconds until the clock indication appears.
appear
cyclically
in
order. F1, F2 and F3 share the same frequency range. q Al and A2 share the same f requency range.
2 3
Press TUNE Press TUNE
Y to set the hour.
A to set the minute.
Band indication Frequency indication
Press SEL to start working the clock from O second.
Havingthe clockdisplayedwhile in Radio, Tape Play or CD Changer Play mode
Press DISP. To return the unit to its former display, DISP again. press
3
Press (more than 2 seconds) either TUNE 7 or TUNE A to tune in the desired station.
The unit starts scanning and tunes in a station automatically (seek tuning). Press TUNE 7 to decrease and TUNE to increase the frequency. Press the button again to cancel seek tuning. Repeat the procedure until the desired station
is tuned in.
A
Note
If you press (less than 0.5 second at a time) either TUNE T or TUNE A,the frequency decreases or increases step by step. <
