Use the [+]/[�] buttons to select on or off.
Example: To turn the channel off.
Using the Parameter Edit Mode
In the Parameter Edit Mode, you can change the settings of ten different parameters (including tone, volume, and pan pot) for the channel you selected on the Mixer screen.
Ch a n n e l
� Press [ ] (EXIT) to return to the channel selection screen. � Pressing the MIXER button returns to the Tone Screen.
To change parameters
1. 2. 3.
Use the channel selection screen to select a channel. Use [ ] (ENTER) to enter the Parameter Edit Mode. Use [ ] and [ ] (CURSOR) to select the parameter whose setting you want to change.
Example: Select volume setting by displaying �Volume�. � Each press of [ ] or [ ] (CURSOR) cycles through the parameters.
Indicates channel volume of 127
� NOTE
� The MIDI data display shows only the data for the channels selected with the Mixer.
How Channel On/Off Works
The following describes what happens and what appears on the display when you turn a channel on or off.
I On (on)
This setting turns on the currently selected channel, which is indicated by a bar appearing at the bottom of the level meter for that channel. This is also the default setting for all channels when the keyboard is turned on.
I Off (oFF)
This setting turns off the currently selected channel, which is indicated by the absence of the bar at the bottom of the level meter for that channel.
V o l ume
4.
Use the number buttons or [+] and [�] to change the parameter setting.
Example: Change the setting to �060�.
On
Off
V o l ume
� Pressing the MIXER button exits the parameter edit mode. � Pressing [ ] (EXIT) returns to the channel selection screen.
