|
No hay comentarios de productos.
Step 3 : console preparation
3a
3b
G I
G
z y yy ,,, zz zzz yyy ,,, || zz | ||| zzz yyy ,,,
a. b. Use 12 screws,�G� to fix the base of the console to the side panels, as illustrated. Use the allen key �U� to tighten the screws. Push fit the glide feet �H� in place.
G
H
IMPORTANT These holes have a recess on one side. The top panel must be fitted so that the recess is on the underside.
a. b.
Turn the console over, onto its feet, and slide the back panel into place. IMPORTANT - Before fixing the top panel in place, make sure that it is facing the correct way up! The side with large recessed holes must be on the underside. Once you are sure that the top panel is fitted correctly, use 4 screws,�G� to fix the top panel to the side panels, as illustrated. Use the allen key, �U� to tighten the screws. Fit both components �I� in place.
c.
4
|
