AIWA CSDES370
Manual de Usuario

POWER SUPPLY
Using on AC house current
Before connecting the AC cord (LH model only) *

u

The LH model has an AC VOLTAGE selector. Make sure that the AC VOLTAGE selector is set to the position matching your local voltage. If it is not correctly set, change it with a screwdriver or a similar tool. Either 110-120V or 220-240V can be selected.

Connect the supplied AC cord. Q) to the AC inlet of the unit
@to a wall outlet

qH

CAUTION
The AC inlet of this set may be connected only with the attached AC power cord or one recommended by AIWA CO., LTD. Use with others may result in the risk of fire or damage of AC inlet. �

Using on batteries
Insert eight R14 (size C) batteries correctly aligned. + u with the 0 and

O marks

Replace batteries when the OPE/BATT indicator becomes dim, the tape speed slows down, volume decreases, or sound is distorted during operation.

q

Make sure that the FUNCTION switch is set to POWER O STANDBY/ TAPE before inserting batteries.

Note on the batteries QMake sure that the ~ and @ marks are correctly
o Do not Never . When battery If liquid
q

aligned. mix different types of batteries or old batteries with new ones. recharge the batteries, apply heat to them or take them apart. not using the batteries, remove them to prevent needless wear. leaks from the batteries, wipe thoroughly to remove.

REMOTE CONTROL (CSD-ES770/ES5700111y)
The remote control can be used only for CD operation. Buttons on the remote control and the main unit with identical tions have the same functions. indica-

Inserting

qu Insert two R6 (size AA) batteries

batteries

before use.

Replacing

batteries

The maximum operation distance of the remote control should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

Hints for correct operation . When the unit is not to be used for a long period, remove the batteries
to prevent electrolyte leakage. . Do not expose the light receiving section to direct sunlight or to strong artificial lighting. If objects intervene between the light receiving section and the remote control, the latter may not work correctly. o The sensor�s light reception range is limited. Point the remote control toward the recorder when using it.

q

6