PANASONIC CQ-C3401H
Manual de Servicio

CQ-C3401H

1 ABOUT LEAD FREE SOLDER (PbF)
Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB. Caution : � Pb free solder has a higher melting point than standard solder; Typically the melting point is 50 - 70°F (30 40°C) higher. Please use a soldering iron with temperature control and adjust it to 700 ± 20°F (370 ± 10°C). In case of using high temperature soldering iron, please be careful not to heat too long. � Pb free solder will tend to splash when heated too high (about 1100°F/600°C) � This lead free solder will be used for the products after serial No. 1,000,001.

3 FEATUERS
� Removable face plate.

� Digital servo for reliable playback. � PLL (Phase Locked Loop) synthesized tuning. � 18-FM, 6-AM presets with preset scan. � MP3/WMA Playback from CD-R/RW. � CD Changer Control.

4 REPLACING THE FUSE
Use fuses of the same specified rating (15 amps). Using different substitutes or fuses with higher ratings, or connecting the product directly without a fuse, could cause fire or damage to the stereo unit.

5 MAINTENANCE
Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry, a soft cloth for routine exterior cleaning. Never use benzine, thinner or other solvents.

2 LASER PRODUCTS

6 NOTES
[RADIO BLOCK] Do not align the AM/FM package block. When the package block is necessary, it will be supplied already aligned at the factory. [CD DECK BLOCK] This model has no servo alignment microcomputer controls the servo circuit. points because

7 DIMENSIONS

3