Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 6043 visitantes online.
Productos
Información
Destacado
Inicio >> HITACHI >> CPX430WA Manual de Servicio
 
 0 artículo(s) en Su carrito 

HITACHI CPX430WA
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del HITACHI CPX430WA Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
CPX430WA(C7X2)
Adjustment procedure 1 (when a colour differential meter is used) 1. First adjust [MID-L] tone [G:]. 2. Select adjustment point [No.2][G:]. When the background is not [G] monochrome, press the [MENU SELECT] key on the Remote control transmitter to change to solid [G] monochrome. 3. Measure the illumination at adjustment points No. 2, No.3, No.10 and No.11. The values should be: No.2 = Y2 [lx] No.10 = Y10 [lx] No.3 = Y3 [lx] No.11 = Y11 [lx] 4. No.2 and No.3 adjustment point have the average of Y2 and Y3. Y2 = ( Y2 + Y3 ) / 2 ± 2 [%] Y3 = ( Y2 + Y3 ) / 2 ± 2 [%] 5. No.10 and No.11 adjustment point have the average of Y10 and Y11. Y10 = ( Y10 + Y11 ) / 2 ± 2 [%] Y11 = ( Y10 + Y11 ) / 2 ± 2 [%] 6. Then adjust [MID-L] tone [R] and [B]. When the background is [G] monochrome, press the [MENU SELECT] key on the Remote control transmitter to change to solid white. 7. Measure the colour coordinates of adjustment point [No.1] and make a note of them. Assume that they are x = x1, y = y1. Note: W h e n t h e C L - 1 0 0 c o l o u r a n d c o l o u r difference meter is used, the [ ](delta) mode is convenient. When adjustment point [No.1] colour coordinate has been selected, set the slide switch on the side to [ ] (delta) while holding down the [F] button on the front panel. The measurement shown after this displays the deviation from measurement point 1. 8. Measure the colour coordinates of measurement point [No.2] and adjust [No.2][R:] and [B:] so that the coordinates are as follows. x = x1 ± 0.005 , y = y1 ± 0.005 9. Similarly, measure adjustment points [No.3] to [No.17] and adjust their colour coordinates starting in order from the small number points. This completes adjustments required for [MIN]. Note: Since excessive correction may lead to a correction data overview during internal calculations, use the following values for reference. [No.2] to [No.5] ± 40 or less [No.6] to [No.9] ± 50 or less [No.10] to [No.13] ± 70 or less [No.14] to [No.17] ± 120 or less 10.Then adjust [MIN] tone [G] so that the adjustment data set three times as much as [MID-L] tone [G]. This completes [G] colour adjustments. 11. Then adjust [MIN] tone [R] and [B]. Select [No.2] [B:] and press the [MENU SELECT] key on the Remote control transmitter to change to solid white. 12.Measure the colour coordinates of adjustment point [No.1] and make a note of them. Assume that they are x = x1, y = y1. 13.N o w m e a s u r e t h e c o l o u r c o o r d i n a t e s o f measurement point [No.2] and adjust [No.2][R:] and [B:] so that the coordinates are as follows. x = x1 ± 0.005 , y = y1 ± 0.010 (Target) x = x1 ± 0.020 , y = y1 ± 0.040 14.Similarly, measure adjustment points [No.3] to [No.17] and adjust their colour coordinates starting in order from the small number points. This completes [MIN] tone adjustments. 15.Now make similar adjustments for [MID-H] tone. (Adjust [MID-H] tone [G] so that the adjustment data set half as many as [MID-L] tone [G].) 16.Now make similar adjustments for [MAX] tone. (Adjust [MAX] tone [G] so that the adjustment data set half as many as [MID-L] tone [G].)

9

Quizás también quiera comprar

$4.99

CPX430WA HITACHI
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.173 - Number of Queries: 99 - Query Time: 0.038