SECTION 1 DISASSEMBLY
1-1. CABINET ASSEMBLY REMOVAL
Push in the tip of a screwdriver about 10mm to unlock the claw. Cabinet assembly Cabinet assembly
Bezel
Bezel
2
Two claws
3
Push the upper side of the cabinet assembly in the direction of arrow A, disconnect claws, then remove the cabinet assembly lifting it up in the direction of arrow B.
5
Five screws (+BVTT 4 x 8)
A
7
EMI shield
B
1
Two screws (+BVTP 4 x 16)
4
Four screws (+BVTT 4 x 8)
EMI shield
C
6
Slide the EMI shield in the direction of arrow C and remove four claws.