Step 1: Hooking up the system
Perform the following procedures 1 to 6 to hook up your system using the supplied cords and accessories.
AM loop antenna FM antenna Right speaker Left speaker
1 Attach the unit to the supplied desktop
stand with the supplied screws (M4 � 14).
After mounting the unit on the stand, be certain to pass the power cord through the groove of the stand. If the stand is set up without passing the power cord through the groove, the weight of the unit will damage the power cord, which could lead to electric shock or fire. Notes
� Be sure to attach the unit to the stand. � Either mount both the left and right speakers, or remove both of the speakers. Do not use the system with only one speaker mounted.
