|
No hay comentarios de productos.
Sound Adjustment
6 Set the starting time.
Press ./> on the remote repeatedly to set the hour, then press ENTER on the remote. The minute indication begins flashing next. Press ./> on the remote repeatedly to set the minute, then press ENTER on the remote. �OFF TIME� appears, then the hour indication flashes again.
Adjusting the sound
Generating a more dynamic sound (Dynamic Sound Generator) Press DSG.
To cancel the DSG, press DSG again.
Adjusting the bass Turn BASS.
7 Set the stopping time by repeating step
6.
You can adjust the bass.
Adjusting the treble Turn TREBLE.
The start time, the stopping time, �TUNER�, and the preset station appear in turn, then the original display returns.
8 Press @/1 to turn off the system.
When the recording starts, the volume level is automatically set to the minimum.
To Do this
You can adjust the treble.
Check the settings
Press TIMER SELECT on the remote repeatedly until �c REC� appears in the display. The preset items appear in turn. Press TIMER SELECT on the remote repeatedly until �c REC� disappears from the display.
Turn off the timer
Tip
Once you set the timer, the time settings will remain in the system�s memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again.
Notes
Tape Sound Adjustment
� The system will turn on 15 seconds before the specified starting time. � If the system is turned on at the specified starting time, recording will not occur. � When you have set the Sleep Timer, the timer recording will not operate until the Sleep Timer Function is turned off. � You cannot operate the Daily Timer and the timer recording at the same time.
15GB
|
