OPERATING INSTRUCTIONS
Turning Power On and Off
s To turn on the main unit power supply, main unit the MAIN POWER switch ( ) of the main unit to ON and then press the SUB POWER button or the POWER button of the remote controller. s To turn off the main unit power supply, press the SUB POWER button of the main unit or the POWER button of the remote controller, then set the MAIN POWER switch ( ) to OFF.
� For normal operations, leave the main power switch ( ) set to ON and use the sub power switch or the Power button of the remote controller to turn the power on and off. Indicating lamp Off Power status Off Operating When the main power switch OFF. is set to
Lights red
Off (standby)
Lights or blinks green
On
When the main power switch is set to ON and Power button of the remote controller or the sub power button on the control panel located at the front part of the bottom plate is off. When the main power switch is set to ON and Power button of the remote controller or the sub power button on the control panel located at the front part of the bottom plate is on.
� When the indicating lamp blinks in green or the message �POWER SAVE� or �OUT OF FREQUENCY� appears on the screen, there is something unusual about the status of reception. See �Symptoms That Seemingly Appear to be Failures.� 23
SUB-POWER
Main power switch
POWER
Main unit
Remote controller
TIPS
� Avoid repeatedly turning the monitor on and off at short time intervals. � Failures might result from such operation. � Turn off the main power switch ( ) before leaving the monitor out of use for an extended period of time. � If a power failure occurs while the main unit is running, it would be powered on upon recovery from the failure. Turn off the unit main power switch before leaving the main unit.