SONY CFD-S35CP
Manual de Servicio

CFD-S35CP SECTION 2 GENERAL
This section is extracted from instruction manual.

Basic Operations

Playing an audio CD or MP3 files

1

4

2, 3

4

Press u (N on the remote). Display The player plays all the tracks once. To play a CD with MP3 files, see page 6.
Track number Playing time

Use these buttons for additional operations
u Z PUSH OPEN/CLOSE VOLUME +, �

Connect the supplied mains lead (see page 23).

., > x OPERATE (POWER)

1

Press CD. (On the remote, press OPERATE (POWER, see page 2) and then press FUNCTION repeatedly until "CD" appears in the display.)
Tip Playback starts from the track you last stopped playing (Resume play). During stop, the track number to be played are displayed. To cancel the resume play to start play from the beginning of the first track, press x in stop mode. To adjust the volume stop playback pause playback Press

2

Press Z PUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment.

VOLUME +*, � (VOL +*, � on the remote.) x u* (X on the remote) Press the button again to resume play after pause. > . Z PUSH OPEN/CLOSE** OPERATE (or POWER, see page 2)

go to the next track go back to the previous track remove the CD turn on/off the player

With the label side up

3

Close the lid of the CD compartment.

* The button has a tactile dot. **Once you open the CD compartment, the track to start play will change to the beginning of the first track.

continued

4

5

Playing an audio CD or MP3 files (continued)

Playing a CD with MP3 files
Z PUSH OPEN/CLOSE ., > FLDR +, � MP3 indicator u CD

Notes � A folder that does not include an MP3 file is skipped. � Maximum number of folders: 255 Maximum number of files: 255 � Folder names and file names can be displayed with up to 64 characters. � The characters A - Z, a - z, 0 - 9, and _ can be displayed on this player. Other characters are displayed as �*�. � This player conforms to Version 1.1 of the ID3 tag format. If the file has the ID3 tag information, �song title�, �artist name� and �album name� can be displayed.

Example of folder structure and playing order The playing order of the folders and files is as follows:
CD-R CD-RW

Folder MP3 file

1

1 2
2 3

Basic Operations Basic Operations

3 4 5
4

Note Before playing a file, this player reads all file and folder information on the CD. Depending on the file structure, it may take more than a minute to read them. During this time, �READING� is displayed. Tip You can use the buttons mentioned in the table on page 5 for additional operations in the same way as when playing an audio CD.

1 2

Press CD. Press Z PUSH OPEN/CLOSE to open the CD compartment and place the CD on the CD compartment (see page 4) .

6 7 8

3 4

Close the lid of the CD compartment. Press u. The player plays all MP3 files on the CD. When you play a CD with MP3 files, MP3 indicator lights up.
6

5

9

0

About CD-Rs/CD-RWs and MP3 files This player can play CD-Rs/CD-RWs recorded in the CDDA format* and MP3 files recorded in the CD-ROM format, but playback capability may vary depending on the quality of the disc and the condition of the recording device.
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs.

Track number

After the file name is displayed, the playing time will appear

To select a folder Press FLDR + to go forward and FLDR � to go backward . Press FOLDER +, � on the remote. To select a file Press > to go forward and . to go backward.

6

7

5