[SERVICE ADJUSTMENT]
Note: Some items of the service adjustments for this chassis are controlled by the CPU, IC801, and the adjustments are carried out by using the RC handset.
IMPORTANT NOTICE Do not attempt to adjust service adjustments not listed below otherwise it may cause loss of performance and product safety. To enter the Service Mode
+ Press and hold the �GREEN� button and the Pw button on front control panel. The adjustment item will be displayed on the screen.
The available adjustment items are as follows; Image Regular other TB1251 : This can be adjusted for picture images/shapes. : This can be adjusted for the service adjustment. : This is for factory setting. Do not adjust. : This is for the factory setting. Do not adjust.
Image
* Do not adjust items in the �other� and �TB1251� otherwise the TV set may not operate properly.
To select the mode and service item and change data value
+ Select the desired adjustment mode (Image or Regular mode ) by using the Pv or Pw button and then press the Volume + (RIGHT) button. + To select the adjustment item, use the Pv or Pw button. + To change the service data, use the Volume -(LEFT) or Volume + (RIGHT) button. + The data which is set in the service mode is stored into the memory IC automatically. Image mode Regular mode
