SANYO CE21DN9FC
Manual de Servicio

OPTION SETTING
[After replacing the Memory IC (IC801)]
The memory IC, IC801, stores the option data of TV set and service adjustments data for each circuit, therefore, when the memory IC is replaced, it should be programmed to the following settings and �SERVICE ADJUSTMENT� on pages 6 to 9.

To enter to the Option Mode
+ Press and hold the F/OK button on the remote control and Pw button on the front panel of the TV. The option window will appear on the screen. OPTION
SORT MODE SORTING P&P ON WEL. TEXT ON AUTO VOLUME OFF SURROUND OFF VIRT SUB WOOFER ON COUNTRY B/G, D/K, I, L/L' WIDE ON AV3 OFF TEXT NO SIGNAL ON AFC OFF
ADJUST : EXIT : RECALL

OPTION MODE FOR CE21DN9F-C-00

To set the Option Mode
+ Highlight the desired option item by using the Pv or Pw button . + To switch the option mode, use the Volume - (LEFT) or Volume + (RIGHT) button. + The data which is set in the option mode is stored into the memory IC automatically. The following table shows the available option items and default setting mode.

Option Mode
SORT MODE P&P WEL. TEXT AUTO VOLUME SURROUND COUNTRY WIDE AV3 TEXT NO SIGNAL AFC

Mode
SORTING or TUNING ON or OFF ON or OFF ON or OFF ON or OFF UK or IRE or BG/DK / I / LL� ON or OFF ON or OFF ON or OFF ON or OFF

Description & Note
Tuning mode, default �SORTING� Plug & Play mode, default �ON� Display message when first set up, default �ON� Auto volume default �OFF� Surround sound default �OFF� Virtual Sub Woofer default �ON� TV system, default �B/G, D/K, I, L/L�� Wide mode, default �OFF� Front AV disable, default �OFF� Disables Text when no signal, default �ON� Auto Frequency Control default �OFF�

VIRT SUB WOOFER ON or OFF

Exit from the Service Mode
+ Press the MENU/
i

button.

-5C6KZV