PIONEER CDX-MG6446ZH/ES
Manual de Servicio

CDX-MG6346ZH,MG6446ZH

SELECTING A CD

1
Flashes orange
6 DISC IN-DASH CD CHANGER

Press one of the buttons (1�6) to select a desired CD for play.
� Green LED indicates CDs are stored and orange LED indicates currently selected CD. � While CDs are being changed, the LED flashes orange until CD changing has been completed, then it lights orange. � You can also select a desired CD by using preset buttons or upward button on the radio.

Disc Number Buttons

Disc status LED

EJECTING THE CD (1 of 2)

1
Eject Button Lights green � Flashes orange � Lights orange
6 DISC IN-DASH CD CHANGER

Press one of the buttons (1�6) to select the disc number for the CD you want to eject.

Disc Number Buttons

Disc status LED

2

Then press eject button to eject the CD.
� The LED flashes green and the CD is ejected.

EJECTING THE CD (con�t)
Note: If you do not remove the ejected CD from the CD loading slot within about 15 seconds, it is automatically reloaded. If you press the eject button, or press the ejected CD�s disc number button (the Disc status LED that�s flashing green), the CD is immediately reloaded. Note: If you leave the ejected CD in the CD loading slot, and press the disc number button for a CD that�s loaded (the Disc status LED is lit green), the ejected CD is reloaded and the CD loaded in the disc number you selected is ejected instead. This function is convenient when the ejected CD is different from the one you want to eject. Notes: � Pull the CD out. The LED flashes green and orange, and this product switches to the CD loading standby mode. � You can eject CDs even if the ignition is switched OFF. In this case, you cannot perform step ¡ to select a CD. When you press the eject button, the currently selected CD is ejected. Also, when you pull a CD out, the door immediately closes. (This unit does not switch to the CD loading standby mode.)

Eject Button

6 DISC IN-DASH CD CHANGER

Disc Number Buttons

Disc status LED

62