SONY CDX-GT360S
Manual de Servicio

CDX-GT31W/GT310/GT360/GT360S SECTION 1 GENERAL This section is extracted
from instruction manual.

� LOCATION OF CONTROLS � CDX-GT31W/GT310
Location of controls and basic operations
Main unit
K SEEK �/+ buttons CD: To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fastforward a track (press and hold). Radio: To tune in stations automatically (press); find a station manually (press and hold). L Receptor for the card remote commander
SCRL

12 3
OFF

4
PUSH SELECT

5

6

7

8

The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 4). qk < (.)/, (>) buttons To control CD/radio, the same as (SEEK) �/+ on the unit. ql VOL (volume) +/� button To adjust volume. w; ATT (attenuate) button To attenuate the sound. To cancel, press again. wa SEL (select) button The same as the select button on the unit. ws M (+)/m (�) buttons To control CD, the same as (1)/(2) (ALBM �/+) on the unit. wd Number buttons To receive stored stations (press); store stations (press and hold).
When an MD changer is connected. When the SAT tuner is connected. When a CD/MD changer is connected. When an MP3/WMA is played. If the changer is connected, the operation is different, see page 11. *6 When playing back on this unit. Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. Tip For details on how to replace the battery, see �Replacing the lithium battery of the card remote commander� on page 13.
*1 *2 *3 *4 *5

EQ3
SEEK

SOURCE
SEEK

AUX

CAT

BTM

MODE
DIM ALBM REP SHUF PAUSE

DSPL

1

2

3

4

5

6

M MODE button 8, 11
CDX-GT310 CDX-GT31W

9q; qa qs qdqfqg
Card remote commander RM-X151

qh

qj

To select the radio band (FM/AM); select the SAT tuner band (mode)*2; select the unit*3. N DSPL (display)/DIM (dimmer) button 8 To change display items (press); change the display brightness (press and hold). O RESET button (located behind the front panel) 4 P Number buttons CD/MD*1: (1)/(2): ALBM �/+*4*5 To skip albums (press); skip albums continuously (press and hold). (3): REP 8 (4): SHUF 8 (6): PAUSE*6 To pause playback. To cancel, press again. Radio: To receive stored stations (press); store stations (press and hold). Q SCRL (scroll) button 8 To scroll the display item.

Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit.

1 4 qk
OFF ATT SOURCE SEL MODE

w; wa qd ws

A OFF button To power off; stop the source. B EQ3 (equalizer) button 9 To select an equalizer type (XPLOD, VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF). C Volume control dial/select button 9 To adjust volume (rotate); select setup items (press and rotate). D SOURCE button To power on; change the source (Radio/CD/ MD*1/AUX/SAT*2). E Disc slot Insert the disc (label side up), playback starts. F Display window G AUX input jack 10 To connect a portable audio device. H Z (eject) button To eject the disc. I BTM/CAT*2 button 8 To start the BTM function (press and hold). J (front panel release) button 5

+

�

qf

DSPL

SCRL

qj wd

1 4

2 5

3 6

+

ql

VOL

�

6

7

� CDX-GT360/GT360S
Location of controls and basic operations
Main unit
K SEEK �/+ buttons CD: To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fastforward a track (press and hold). Radio: To tune in stations automatically (press); find a station manually (press and hold). L Receptor for the card remote
DIM ALBM REP SHUF PAUSE

12 3
OFF

4

5

6

7

8

The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 4). ql < (.)/, (>) buttons To control CD/radio, the same as (SEEK) �/+ on the unit. w; VOL (volume) +/� button To adjust volume. wa ATT (attenuate) button To attenuate the sound. To cancel, press again. ws SEL (select) button The same as the select button on the unit. wd M (+)/m (�) buttons To control CD, the same as (1)/(2) (ALBM �/+) on the unit. wf Number buttons To receive stored stations (press); store stations (press and hold).
When an MD changer is connected. When an MP3/WMA is played. When a CD/MD changer is connected. If the changer is connected, the operation is different, see page 11. *5 When playing back on this unit. Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. Tip For details on how to replace the battery, see �Replacing the lithium battery of the card remote commander� on page 13.
*1 *2 *3 *4

PUSH SELECT

EQ3
SEEK

SOURCE
SEEK

AUX

BTM

MODE DSPL 1 2 3 4 5 6 SCRL

9q; qa qs qdqfqg qh
Card remote commander RM-X151

qj

qk

CDX-GT360S CDX-GT360

commander M MODE button 8, 11 To select the radio band (FM/MW/SW); select the unit*2. N DSPL (display)/DIM (dimmer) button 8 To change display items (press); change the display brightness (press and hold). O RESET button (located behind the front panel) 4 P Frequency select switch (located on the bottom of the unit) See �Frequency select switch� in the supplied installation/connections manual. Q Number buttons CD/MD*1: (1)/(2): ALBM �/+*3*4 To skip albums (press); skip albums continuously (press and hold). (3): REP 8 (4): SHUF 85 (6): PAUSE* To pause playback. To cancel, press again. Radio: To receive stored stations (press); store stations (press and hold). R SCRL (scroll) button 8 To scroll the display item.

Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit.

1 4 ql

OFF

ATT

SOURCE

SEL

MODE

wa ws qd wd

A OFF button To power off; stop the source. B EQ3 (equalizer) button 9 To select an equalizer type (XPLOD, VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF). C Volume control dial/select button 9 To adjust volume (rotate); select setup items (press and rotate). D SOURCE button To power on; change the source (Radio/CD/ MD*1/AUX). E Disc slot Insert the disc (label side up), playback starts. F Display window G AUX input jack 10 To connect a portable audio device. H Z (eject) button To eject the disc. I BTM button 8 To start the BTM function (press and hold). J (front panel release) button 5

+

�

qf
DSPL
1 4 2 5

qk
SCRL
3 6

wf

+

w;

VOL

�

6

7

5