SONY CDX-FW700
Manual de Servicio

CDX-F7000/F7005X/FW700 SECTION 1 GENERAL
k MODE button To change operation. l LIST (CAT)*3 button 15, 18 m DISC (ALBUM) (M/m) buttons To receive preset stations/change the disc*4, skip albums*5/select a menu. n ENTER button To enter a setting. o ATT button 20
*1 When an optional MD unit is connected. *2 device is connected to AUX IN terminal of the unit. Available only when an optional Sony portable

This section is extracted from instruction manual.
Selecting a disc and album
Disc and album can be skipped using the DISC (ALBUM) (M/m) buttons.

Location of controls
Card remote commander RM-X118A
Refer to the pages listed for details.
DSPL
REP SHUF PTY

(With optional unit)
To Press

1 4 DSO

2 5
MODE

3 6 EQ7
CAT

a DSPL (display mode change) button 12, 14, 21 b Number buttons Radio: To store stations/receive stored stations. CD/MD: (1): REP 13 (2): button 23 c DSOSHUF 13 d MENU button To display the menus. e SOURCE (Power on/Radio/CD/MD*1/ AUX*2) button To select the source. SEEK/AMS (</,) buttons To skip tracks/fast-forward, reverse a track/ tune in stations automatically, find a station manually/select a setting. SOUND button 20 OFF (Stop/Power off) button 11, 24 VOL (+/�) buttons To turn up or down the volume. EQ7 button 22

Skip discs � Disc selection

M or m [once for each disc]

Skip albums*6 M or m [hold for a moment] � Album selection and release. To continuously skip albums, press (and hold) within about 1 second of first releasing the button.
*6 Available only when an optional CD unit with the MP3 file control function is connected, and MP3 file is played.

MENU

DISC + SOURCE

LIST

SEEK�

SEEK+

SOUN

D

DISC �

ENTE

R

f
OFF ATT

When you connect a Sony portable device and CD/ MD unit(s) at the same time, use the AUX IN selector. The CAT button is available only when the XM *3 tuner is connected. *4 When an optional CD/MD unit is connected. *5 Available only when an optional CD unit with the MP3 file control function is connected, and MP3 file is played. Note If the display disappears by pressing (OFF), it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. Tip For details on how to replace the battery, see �Replacing the lithium battery� on page 25.

Skipping tracks continuously
Press once either SEEK/AMS (< or ,) button, then press again within about 1 second and hold.

VOL

g h i j
(DISC) (M): to select upwards
DISC +

(SEEK) (<): to select leftwards

SEEK�

SOURCE

SEEK+

(SEEK) (,): to select rightwards

DISC �

(DISC) (m): to select downwards

In menu mode, the currently selectable button(s) of these four are indicated with a � v� in the display.

4

5

DISC/ PRESET
PUSH SOUND

MODE DSO D SEEK

OPEN

DISC/ PRESET
PUSH SOUND

MODE DSO D SEEK

OPEN

SEEK

�

+

SCRL S EQ7 E
REP SHUF

IMAGE

SEEK

�

+

SCRL S EQ7 E
REP SHUF

IMAGE

DISC/ PRESET

OFF

SOURCE

1

2

3

4

5

6

DSPL

DISC/ PRESET

OFF

SOURCE

1

2

3

4

5

6

DSPL

CDX-F7005X/F7000

CDX-FW700

The buttons on the unit share the same functions as those on the card remote commander. a 5 SEEK/AMS (.m/M>) buttons b Volume control dial/SOUND button Rotate to: � Adjust the volume. � Adjust the sound settings. Press to: � Select the sound items. 3 qs DISC (ALBUM)/PRESET (+/�) buttons 4 MODE button 6 DSO button 7 SCRL (scroll) button 8 Display window 9 Z (eject) button (located on the front side of the unit, behind the front panel) 10, 11 0 OPEN button 9, 10, 11 qa Receptor for the card remote commander qd OFF (Stop/Power off) button* qf EQ7 button qg RESET button (located on the front side of the unit, behind the front panel) 8 qh SOURCE button qj Number buttons qk DSPL (display mode change) button ql IMAGE button 23
* Warning when installing in a car without an ACC (accessory) position on the ignition switch After turning off the ignition, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain.

The buttons on the unit share the same functions as those on the card remote commander. a 5 SEEK/AMS (.m/M>) buttons b Volume control dial/SOUND button Rotate to: � Adjust the volume. � Adjust the sound settings. Press to: � Select the sound items. 3 qs DISC (ALBUM)/PRESET (+/�) buttons 4 MODE button 6 DSO button 7 SCRL (scroll) button 8 Display window 9 Z (eject) button (located on the front side of the unit, behind the front panel) 10, 11 0 OPEN button 9, 10, 11 qa Receptor for the card remote commander qd OFF (Stop/Power off) button* qf EQ7 button qg RESET button (located on the front side of the unit, behind the front panel) 8 qh SOURCE button qj Number buttons qk DSPL (display mode change) button ql IMAGE button 23
* Warning when installing in a car without an ACC (accessory) position on the ignition switch After turning off the ignition, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain.

6

6

5