7.2 DIAGNOSIS 7.2.1 DISASSEMBLY
CD Mechanism Module - Removing the Upper Case(not shown) 1. Remove the night screws. 2. Remove the Upper Case. - Removing the CD Mechanism Module
Remove the four dampers(Fig.5). Disconnect the connector(Fig.5). Remove the two springs(Fig.5). Disconnect the connector and then remove the CD Mechanism Module(Fig.6). - Removing the Grille Unit(not shown) 1. Press the two tabs indicated by arrows and then pull out the Grille Unit(Exterior section parts list No.50).
Fig.5
Fig.6
- Removing the Extension Unit(Fig.7) Remove the two screws.
Remove the screw.
Remove the claw and remove the Extension Unit. Extension Unit
