PIONEER CDS-P4000
Manual de Usuario

Using the CD Player
Function Menu Functions
The following chart shows functions in the CD Player Function Menu. This chart shows the function operation and button for each function.

CD Player and Care
Scan Play (T-SCAN)
Scan Play plays the first 10 seconds or so of each track on a CD in succession.

CD Player Troubleshooting
Error Message
When problems occur with CD playback, an error message appears on the head unit display.
COMPACT

Precaution
� Play only CDs bearing the Compact Disc Digital Audio mark.

7 CD Player
Function name (Display)
Repeat Play (REPEAT) Random Play (RANDOM) Scan Play (T-SCAN) Pause (PAUSE)

1. Press the FUNCTION button and select the Scan mode (T-SCAN) in the Function Menu.
Operation
:ON :OFF :ON :OFF :ON :OFF :ON :OFF

Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Service Center.

Button
5 � 5 � 5 � 5 �

2. Switch the Scan Play ON with the 5 button.

DIGITAL AUDIO

� This product is designed for use with conventional, fully circular CDs only. Use of shaped CDs are not recommended for this product.

Message
ERROR- 11, 12, 17, 30 ERROR- 11, 12, 17, 30 ERROR- 14 ERROR- 10, 11, 12, 14,

Possible cause
Dirty disc. Scratched disc. Unrecorded CD. Electrical or mechanical problem. All tracks are setting track skip. CD player overheating.

Recommended action
Clean the disc. Replace the disc. Check the disc. Turn the ignition ON and OFF, or switch to a different source, then back to the CD player. Replace the disc. Discontinue play until the machine temperature drops.

3. When you find the desired track, cancel the Scan Play by pressing the � button.
If the Function Menu has been canceled automatically, select the Scan mode in the Function Menu again. Note:
� Scan Play is canceled automatically after all the tracks on a disc have been scanned.

Note:
� With some Head Units, the Function Menu may feature a CD Sound Quality Adjustment (COMP) function. When you combine this CD player with such a Head Unit, if �NO COMP� is displayed, it indicates that the CD Sound Quality Adjustment function is not available.

Repeat Play (REPEAT)
Repeat Play plays the same track repeatedly.

Pause (PAUSE)
Pause pauses the currently playing track.

� Check all CDs before playing and discard cracked, scratched or warped discs. � Normal playback of CD-R discs other than those recorded with a music CD recorder may not be possible. � Playback of music CD-R discs, even those recorded with a music CD recorder, may not be possible with this product due to disc characteristics or scratches or dirt on the disc. Dirt or condensation on the lens inside this product may also prevent playback. � This product conforms to the track skip function of the CD-R disc. The tracks containing the track skip information are skipped over automatically. � Read the precautions with the CD-R discs before using. � Wipe dirty or damp discs outward from the center with a soft cloth.

17, 30, A0 ERROR- 44 HEAT

1. Press the FUNCTION button and select the Repeat mode (REPEAT) in the Function Menu. 2. Switch the Repeat Play ON/OFF with the 5/� buttons.
Note:
� If you perform Track Search or Fast Forward/Reverse, Repeat Play is automatically canceled.

1. Press the FUNCTION button and select the Pause mode (PAUSE) in the Function Menu. 2. Switch the Pause ON/OFF with the 5/� buttons.

Note:

� You can also switch the Pause function ON/OFF by pressing the PGM button.

� Avoid touching the recorded (iridescent) surface when handling discs. � Store discs in their cases when not in use. � Keep discs out of direct sunlight and high temperatures. � Do not affix labels or apply chemicals to discs. � Condensation may collect inside the player when using the heater in cold weather, interfering with playback. Turn it off for an hour or so and wipe damp discs with a soft cloth. � Road shocks may interrupt CD playback.

Random Play (RANDOM)
Random Play plays the tracks on a CD in random order for variety.

Disc Title Input (TITLE IN)
The CD player�s Disc Title Input function is possible for up to 100 discs when a Multi-CD player is installed. The connected Head Unit�s Operation Manual features details concerning operation. Refer to �Disc Title Input� in the manual�s �Using Multi-CD Players� section.

1. Press the FUNCTION button and select the Random mode (RANDOM) in the Function Menu. 2. Switch the Random Play ON/OFF with the 5/� buttons.