Press the SKIP PLAY button to turn the SKIP ON indicator off.
÷ With a CD-R or CD-RW disc which does not contain skip IDs, the SKIP ON indicator will not light even when the SKIP PLAY button is pressed.
2
SKIP ID SET
2
Play the track with the skip ID to be cleared. Select it with the numeric buttons of the remote control unit or the 41 or ¡¢ buttons (4 or ¢ on the remote control unit). During playback of the track which is not to be skipped, press the SKIP ID CLEAR button.
�SKIP� and �CLEAR?� are displayed alternately.
÷ When the 41 or ¡¢ buttons (4 or ¢ on the remote control unit) are pressed while �SKIP� and �CLEAR?� are displayed, tracks to which the skip IDs are set will be played in order of track numbers. ÷ The selected tracks play back repeatedly. ÷ If you press the SKIP ID CLEAR button during playback of a track without a skip ID, the unit searches for the next track with a skip ID (or it returns to the beginning if there is no next track) and starts playback. ÷ To cancel the clearing mode, press the 3 button or SKIP ID SET button.
REPEAT
3
2
2 5 8 >10 3 6 9
TIME
1 4 7 10
3
2
1
SKIP PLAY
4
Turn this off. Extinction. Apague esto.
To clear a track of the skip ID, press the SKIP ID CLEAR button again while the track is playing. Skip IDs can be cleared from other tracks by repeating steps 2 to 4 for each of them. After having cleared the required skip IDs, press the OPEN/CLOSE 0 button.
÷ When the button is pressed to remove the disc, the skip ID clear data is recorded on the disc. At this time, and blinks �OPEN� is displayed for a few seconds, and the tray opens after the skip ID clear data has been recorded.
5 6
2
1 4 7 2 5 8 3 6 9
or ou o
10
>10
CAUTION: Skip IDs cannot be set or cleared with CDs, finalized CD-R discs, or finalized CD-RW discs.
SKIP ID