|
Usuarios conectados
Actualmente hay 5629 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
RECORDING
Start digital recording 1 With the recorder stopped, press RECORD to enter the Record standby mode. � RECORD will flash.
Synchronized digital recording - CD-SYNC
RECORD
FINALIZE
ERASE
CD-Sync
DIG AUTO ANALOG PROG
TRACK
REPEAT 1 TOTAL
REM
TRACK
TIME
CD SYNC RECORD FINALIZE ERASE
Recordable
DIG PROG
TRACK
REPEAT 1 TOTA L
RE M
TIME
CD
RECORDABLE
L R -50 -40
-30 -20 -10 -6
RECORDABLE
L
COPY
-3
0
OVER
� If DIG also flashes, the digital connection is incorrect. 2 To start recording, press PLAY and immediately start the source (from stop mode). � RECORD lights continuously. The track number and recording time used will be indicated on the display. � To record a 3-second silence at the start of a track, press PAUSE. � To check the (remaining) recording time, press DISPLAY. (This can also be done during the recording.) 3 To stop recording, press STOP on the CD recorder. � RECORD will go out. � To interrupt recording, press PAUSE. � RECORD starts to flash. Resume at step 2. After recording the display will show UPDATE for several seconds. Note: With AUTO TRACK on, the recorder will stop automatically. Recordings from DAT or DCC will stop after 20 seconds silence. With AUTO TRACK off, the AUTO STOP mode is disabled. Preparing for synchronized digital recording The CD-SYNC feature enables you to make a fast and easy digital recording of a CD. Track increments are automatically detected from the digital source material. Track increments cannot be added manually. 1 Make sure the disc is absolutely free of scratches and dust particles. 2 Press Source repeatedly until (depending on the connection used): � DIG COAXIAL or DIG OPTICAL will appear on the display. Start synchronized digital recording 1 With the CD recorder stopped, press CD-SYNC. � On the display, CD-SYNC & SYNC appears. After a time, RECORD starts to flash.
DIG AUTO ALOG PROG TRACK REPEAT 1 TOTAL REM TRACK TIME CD SYNC RECORD FINALIZE ERASE COPY
� If DIG also flashes, the digital connection is incorrect. 2 To start recording, press Play on the digital source. � The CD recorder automatically starts to record and RECORD lights continuously. The track number and recording time used will be indicated on the display � If you start the source during a track, CD-SYNC will not start recording until the beginning of the next track. � To check the (remaining) recording time, press Display. (This can also be done during recording) 3 To stop recording, press STOP on the CD recorder. � CD-SYNC and RECORD will go out. � To interrupt recording, press PAUSE. � RECORD will start to flash. To resume, press PLAY on the CD recorder.
13
English
|
|
|
> |
|