PHILIPS CDR570BK
Manual de Usuario

INSTALLATION
English
15

Power supply

Inserting batteries in the remote control

1 Plug the power cord supplied into the POWER SUPPLY connector on the CD recorder, then into a wall socket. 2 Press ON/OFF. § The recorder is now in Standby mode. 3 Press any key to activate the recorder.

1 Open the battery compartment cover. 2 Insert 2 batteries �AA� (LR6) UM-3; as supplied as shown. 3 Replace the cover.

Note: - The CD recorder will automatically adjust to the local mains voltage. - When the CD recorder is in the �OFF� position, it is still consuming some power. If you wish to disconnect your CD recorder completely from the mains, withdraw the plug from the AC Outlet.

Note: We recommend that you use 2 batteries of the same type and condition. Batteries contain chemical substances; they should be disposed of properly.

Setup recommendations
- Place the CD recorder on a solid, vibration-free surface. - Do not place the CD recorder near a source of heat or in direct sunlight. - Do not use the CD recorder under extremely damp conditions. - If the CD recorder is placed in a cabinet, make sure that a one-inch space remains free on all sides of the CD recorder/player for proper ventilation.