PIONEER CDR1546
Manual de Servicio

SCU-M2096ZH,CD-R1546ZH
MEMORIZING STATIONS (PRESET MEMORY)
A selected station is memorized in one of buttons [10]. Memorizing a Station ............. [10] 2 Choose one of buttons [10], and hold it down until you hear a beep (about 2 seconds). The preset number � will light, and the station will be memorized in the chosen button.
Advice

AUTOMATIC TUNING ......... [5]
The radio automatically tunes in to a station with a strong signal above a certain level. Press (�) or (5) button [5].

AUTO SELECT ........... [1]

[3]

MANUAL TUNING ....... [7]

2

[5]

This is useful for tuning in to a station with a very weak signal that cannot be picked up with automatic tuning. 1.Continue pressing button [7] for 2 or more seconds. (Until you hear a beep.) 2.Select a station by pressing the (�) or (5) side of button [5]. If you do not press a button for more than 10 seconds, you will hear a beep and automatically be returned to AUTOMATIC TUNING mode.
Advice

Broadcasts of high output stations can be memorized in button [10] of UT (FMT) band according to the following procedure. 1. Press button [1] to switch over band to U1, U2 or UT. 2. Press button [3] to start automatic memorization of high output stations. Through automatic memorization operation,�A.SEL� * is displayed. (�A�SEL� flashes (.)
Advice

� The radio cannot be heard while the button is being held down.
Recalling a Station (Direct Recall) .......................... [10] When the button [10] is pressed again after a station has been memorized, the radio will be tuned to the station stored in that button. The� on theof the pressed button lights in number display. Recalling a Station (Sequential Recall) .................. [11] Each time you press button [11], stations stored in the buttons [10] are recalled in order.

� There is no audio output in automatic memorizing operation. � When automatic memorization is started with U1/U2 band, the same is performed for UT band that is automatically switched on to follow U1 and U2 bands. � Automatic memorization cannot be activated for MW and LW bands.
3. With completion of general automatic memorization, �A.SEL� * goes out and the radio receives broadcast of the highest output station.

� When returning to automatic tuning, continue pressing button [7] for 2 seconds or more once again. (Until you hear a beep.)

OTHER FUNCTIONS
Stereo Indicator When the radio is tuned to an FM stereo station, �ST� & will be displayed.

PLAYING CD
� The proper Honda CD changer (sold separately) is required to play CDs.
[2] [3] [5] [9]

LISTENING TO A CD ..................... [2]

When button [2] is pressed, CD playback starts and the disc number �, track number � and �CD� � appear on the display. Playback is stopped by pressing button [9].
Advice

[9]

TRACK SELECTION (TRACK NUMBER SEARCH) .................. [5]

[11]

Press the (�) or (5) side of button [5] for a moment (less than 0.5 seconds), and press the button repeatedly until you reach the track you want to play. Each time you press button [11], tracks change in order.

NEWS TP

ST

AF REG TA

CH

RPT A.SEL

� If there is no magazine in the CD changer, �EJECT� will appear on the display.

FAST FORWARD AND REVERSE ...................... [5]

0.5

[11]

[10]

SELECTING A DISC ............ [10]
Press the button in [10] with the same number as the number of the disc you want to play.
Advice

Press the (�) or (5) side of button [5] until you hear a beep (0.5 seconds or more).
Advice

� Keep both hands on the handlebars while riding.

� There is a delay of several seconds before the music starts after pressing the button, due to the disc changeover operation.

� Playback can be heard during fastforwarding or reversing. � Fast-forwarding or reversing is performed only as long as the button is pressed.

45