SECTION 2 DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
2-1. FRONT PANEL
� When removing the front panel assembly on electric power failure, first open the loading block by turning cam with a screwdriver as shown in the figure, next pull out the loading block with hand, and remove the loading panel as shown in the figure, then remove the front panel assembly.
3 Remove loading panel in the arrow direction.
bottom of chassis
1Turn in the direction of the arrow.
2 Pull out disc table.
2-2. BASE UNIT BLOCK
1 Turn the cam to direction of arrow (Counter clockwise) by minus screw driver. 2 Take off the disc table. 3 Remove the yoke bracket. 4 Remove the MD (BU-5BD20) to the direction of arrow.
